Improved Road Design for Future Maintenance - Analysis of Road Barrier Repair Costs

The cost of a road construction over its service life is a function of the design, quality of construction, maintenance strategies and maintenance operations. Unfortunately, designers often neglect a very important aspect which is the possibility to perform future maintenance activities. The focus is mainly on other aspects such as investment costs, traffic safety, aesthetic appearance, regional development and environmental effects. This licentiate thesis is a part of a Ph.D. project entitled “Road Design for lower maintenance costs” that aims to examine how the life-cycle costs can be optimized by selection of appropriate geometrical designs for the roads and their components. The result is expected to give a basis for a new method used in the road planning and design process using life-cycle cost analysis with particular emphasis on road maintenance. The project started with a review of literature with the intention to study conditions causing increased needs for road maintenance, the efforts made by the road authorities to satisfy those needs and the improvement potential by consideration of maintenance aspects during planning and design. An investigation was carried out to identify the problems which obstruct due consideration of maintenance aspects during the road planning and design process. This investigation focused mainly on the road planning and design process at the Swedish Road Administration. However, the road planning and design process in Denmark, Finland and Norway were also roughly evaluated to gain a broader knowledge about the research subject. The investigation was carried out in two phases: data collection and data analysis. Data was collected by semi-structured interviews with expert actors involved in planning, design and maintenance and by a review of design-related documents. Data analyses were carried out using a method called “Change Analysis”. This investigation revealed a complex combination of problems which result in inadequate consideration of maintenance aspects. Several urgent needs for changes to eliminate these problems were identified. Another study was carried out to develop a model for calculation of the repair costs for damages of different road barrier types and to analyse how factors such as road type, speed limits, barrier types, barrier placement, type of road section, alignment and seasonal effects affect the barrier damages and the associated repair costs. This study was carried out using a method called the “Case Study Research Method”. Data was collected from 1087 barrier repairs in two regional offices of the Swedish Road Administration, the Central Region and the Western Region. A table was established for both regions containing the repair cost per vehicle kilometre for different combinations of barrier types, road types and speed limits. This table can be used by the designers in the calculation of the life-cycle costs for different road barrier types.

Road Design for Future Maintenance : Life-cycle Cost Analyses for Road Barriers

The cost of a road construction over its service life is a function of design, quality of construction as well as maintenance strategies and operations. An optimal life-cycle cost for a road requires evaluations of the above mentioned components. Unfortunately, road designers often neglect a very important aspect, namely, the possibility to perform future maintenance activities. Focus is mainly directed towards other aspects such as investment costs, traffic safety, aesthetic appearance, regional development and environmental effects. This doctoral thesis presents the results of a research project aimed to increase consideration of road maintenance aspects in the planning and design process. The following subgoals were established: Identify the obstacles that prevent adequate consideration of future maintenance during the road planning and design process; and Examine optimisation of life-cycle costs as an approach towards increased efficiency during the road planning and design process. The research project started with a literature review aimed at evaluating the extent to which maintenance aspects are considered during road planning and design as an improvement potential for maintenance efficiency. Efforts made by road authorities to increase efficiency, especially maintenance efficiency, were evaluated. The results indicated that all the evaluated efforts had one thing in common, namely ignorance of the interrelationship between geometrical road design and maintenance as an effective tool to increase maintenance efficiency. Focus has mainly been on improving operating practises and maintenance procedures. This fact might also explain why some efforts to increase maintenance efficiency have been less successful. An investigation was conducted to identify the problems and difficulties, which obstruct due consideration of maintainability during the road planning and design process. A method called “Change Analysis” was used to analyse data collected during interviews with experts in road design and maintenance. The study indicated a complex combination of problems which result in inadequate consideration of maintenance aspects when planning and designing roads. The identified problems were classified into six categories: insufficient consulting, insufficient knowledge, regulations and specifications without consideration of maintenance aspects, insufficient planning and design activities, inadequate organisation and demands from other authorities. Several urgent needs for changes to eliminate these problems were identified. One of the problems identified in the above mentioned study as an obstacle for due consideration of maintenance aspects during road design was the absence of a model for calculating life-cycle costs for roads. Because of this lack of knowledge, the research project focused on implementing a new approach for calculating and analysing life-cycle costs for roads with emphasis on the relationship between road design and road maintainability. Road barriers were chosen as an example. The ambition is to develop this approach to cover other road components at a later stage. A study was conducted to quantify repair rates for barriers and associated repair costs as one of the major maintenance costs for road barriers. A method called “Case Study Research Method” was used to analyse the effect of several factors on barrier repairs costs, such as barrier type, road type, posted speed and seasonal effect. The analyses were based on documented data associated with 1625 repairs conducted in four different geographical regions in Sweden during 2006. A model for calculation of average repair costs per vehicle kilometres was created. Significant differences in the barrier repair costs were found between the studied barrier types. In another study, the injuries associated with road barrier collisions and the corresponding influencing factors were analysed. The analyses in this study were based on documented data from actual barrier collisions between 2005 and 2008 in Sweden. The result was used to calculate the cost for injuries associated with barrier collisions as a part of the socio-economic cost for road barriers. The results showed significant differences in the number of injuries associated with collisions with different barrier types. To calculate and analyse life-cycle costs for road barriers a new approach was developed based on a method called “Activity-based Life-cycle Costing”. By modelling uncertainties, the presented approach gives a possibility to identify and analyse factors crucial for optimising life-cycle costs. The study showed a great potential to increase road maintenance efficiency through road design. It also showed that road components with low investment costs might not be the best choice when including maintenance and socio-economic aspects. The difficulties and problems faced during the collection of data for calculating life-cycle costs for road barriers indicated a great need for improving current data collecting and archiving procedures. The research focused on Swedish road planning and design. However, the conclusions can be applied to other Nordic countries, where weather conditions and road design practices are similar. The general methodological approaches used in this research project may be applied also to other studies.

Arctic Tourism: Realities & Possibilities

This paper addresses human capital in the Arctic in relation to tourism. More specifically, with an ever-increasing number oftourists recognizing the attractiveness of the Arctic, tour companies are increasingly recognizing the opportunities. The media(typically southern media) sells the image, either before or after the tourists arrive, and communities are often left to deal with therepercussions – whether those are social, economic, environmental, or the like. Many of the repercussions are negative; however,even when perceived as positive they can create tensions within small communities and showcase a variety of capacity issues.This paper focuses on the realities and possibilities of tourism in the Arctic. It offers an up-to-date descriptive overview of tourismnumbers and valuations. In addition, ‘realities’ also focuses on the current suite of challenges and ‘possibilities’ addresses criticalquestions that need to be asked as tourism grows. We are in an uncertain age and academic critique of the Arctic tourismphenomenon is growing as quickly as the numbers. This paper is almost fully circumpolar in outlook, written by individuals fromthose jurisdictions, and aims to intersect with other sectors active in the Arctic.

The Passionate Combining Entrepreneurs

Entrepreneurs are portrayed as salient drivers of regional development and for a number of years nascent entrepreneurs have been studied in a large number of countries as part of the Global Entrepreneurship Monitor project and the Panel Study of Entrepreneurial Dynamics. Scholars have devoted much effort to investigating factors that determine how individuals engage in entrepreneurial activities, with most of the discussion limited to business start-ups. However, since this type of project does not follow identical nascent entrepreneurs over time, limited knowledge exists about their development and whether they stay in this nascent phase for a long time. In practice, it is common for entrepreneurs to run a business and at the same time work in wage work, so-called combining entrepreneurs. In Sweden, almost half of all business owners combine wage work with a business. However, not all combining entrepreneurs will eventually decide to leave the wage work and invest fully in the business. Consequently, much research has focused on the first step of entering entrepreneurship full time, but less has focused on the second step, the transition from the combining phase to full-time self-employment. The aim of this thesis is therefore to contribute to the theory of entrepreneurship by gaining a deeper understanding of combining entrepreneurs and their motives and intentions.   In the context of combining entrepreneurs, the theory of identity, resources and choice overload has been used to examine how entrepreneurs’ age (when starting the business), entrepreneurial tenure (the length of engagement in the side-business), hours spent (weekly involvement in the side-business), involvement in entrepreneurial teams (leading the business with one or more partners) and involvement in networks (business networks) influence their passion for engaging in entrepreneurship while sustaining wage work. Different categories of combining entrepreneurs and their intentions have also been examined.   A survey was administered to 1457 entrepreneurs within the creative sector in two counties in Sweden (Gävleborgs County and Jämtlands County). Since there were no separate mailing lists to only combining entrepreneurs, the survey was sent to all entrepreneurs within the chosen industry and counties. The total response rate was 33.5 percent and of them 57.6 percent combined, yielding 262 combining entrepreneurs who answered the questionnaire. The survey was then followed up with eight focus group interviews and two single interviews to validate the answers from the questionnaire.   The results indicate three types of combining entrepreneurs: nascent – with the intention to leave the combining phase for a transition into full-time self-employment, lifestyle – with the intention to stay in the combining phase, and occasional – with the intention to leave the combining phase for full-time wage work and close down the business. Transitioning fully to self-employment increases with the individual’s age. Also, a positive interactive effect exists with involvement in entrepreneurial networks. The results also indicate that the ability to work with something one is passionate about is the top motive for combining wage work with a side-business. Passion is also more likely to be the main motive behind the combining form among individuals who are older at business start-up, but passion is less likely to be the main motive behind the combining form among individuals who spend more time on the business. The longer the individual has had the side-business, the less likely passion is the main motive behind the combining form, and passion is less likely to be the main motive among those who are part of an entrepreneurial team.